Categories

Hydraulic vulcanizing press PKMV-40 series

The electro-hydraulic universal technological press of the PKMV-40 version with a microprocessor operator`s console and an asynchronous electric drive of the drive pump is designed for molding and vulcanizing composite materials (carbon fiber, fiberglass, rubber, rubber-asbestos mixtures and other materials). Produced in accordance with GOST 11997-89 and TU 3624-002-75911452-2013.

The vulcanizing press of PKMV-40 version can be used for pressing thermosetting plastics and insulating products, in the manufacture of samples for testing rubber compounds in accordance with the requirements of GOST 30263-96 (ISO 2393, ASTM D3182) and polyethylene samples in accordance with GOST 16337-77, as well as for compression tests within the limits of technical possibilities. The vulcanizing press of PKMV-40 version is equipped with a microprocessor-based control system and registration of power and temperature test indicators.

The press microprocessor control system allows:

Carry out physical and mechanical tests and technological processes in manual / semi-automatic / automatic modes for controlling the heating of plates, their pressing force and pressing time
Program the parameters of physical and mechanical tests and technological processes in a dialog mode
Perform digital tuning of the sensor system, drive pump asynchronous electric drive system, heating system and automatic zeroing
Display data arrays in the form of tables, graphs on the display and laser printer, and save this data
Provide digital protection of the press against overloads and emergencies

from $15 000
Write to seller
To send a message you need Sign in
Category
Hydraulic Vulcanizing Presses
Execution options

By additional agreement, the design of the PKMV-40 vulcanization press may include peripheral equipment:

Water cooling of plates to accelerate their cooling after heating
Auxiliary structures and tables (roller table, lifting, pneumatic) for more convenient placement and movement of molds
Fencing of the working area with the possibility of using a ventilation system
Protective fence of the working area (based on photo-impulse sensors or mechanical limit switches)



Additional characteristics

Rated force, kN / tf
400 / 40
Rated oil pressure in the hydraulic system, MPa / kgf / cm2
10 / 100
Stoke range, mm
0 - 500
Rod diameter, mm
200
Number of heating plates
2-5
Number of working areas
1 – 4
Overall dimensions of heating plates, mm
350×350
Distance between heating plates, mm
100 - 500 (± 3)
Press force control limits
From 10% of the
Plate heating method
Electric
Maximum operating temperature of plates, °С
+150 … +400 °С